Pump Reservoirs

Request a Quote

The most complete line of pre-engineered systems for cooling tower and central chiller applications providing the highest quality design and construction features available. Standard, full sized pump trim, extended pump suctions legs, welded seams and solid steel decking under pumps and a Panasonic PLC are just some of the value-added features incorporated into every system. Our selection of reservoirs, pumps, controls and alarms, plus complete engineering support from system design to plant layout drawings, assure you of the correct system for your application.

Pump Reservoir System Features

  • Available in fiberglass or stainless steel for indoor or outdoor installations
  • PLC for quick and easy operation
  • Premium-efficiency, close-coupled, non-overloading, centrifigual pumps provide optimum flow and pressure with reduced electrical costs
  • All pumps are mounted on a solid deck for added rigidity, serviceability, and safety
  • Grooved pipe connecting system reduces the need for flexible couplings and eliminates pipe stress at start-up; connections readily disassemble for fast maintenance and reconfiguration when adding or changing pumps
  • Full size pump suction legs on stainless steel tanks feature a 45° angle opening to prevent vortexing and pump cavitation, which can lead to pump damage and reduced pump performance
  • Liquid filled pump discharge pressure gauges enable accurate flow adjustment; isolation cocks prevent gauge pressure fluctuation and extend pressure gauge life
  • Factory mounted thermometer allows quick monitoring of process water temperature
  • Discharge check valve stops supply line flowback, eliminates the potential for water hammer at pump start-up
  • Properly sized pump suction and discharge piping trim eliminates excessive pressure drop and maximizes flow to process
  • Prewired and mounted control panel is hardwired to pump motors using weatherproof conduit, simplifying field installation and reducing installation costs (optional)
  • Suction buttlerfly valve allows pump to be changed without draining the reservoir
  • Automatic water make-up assembly maintains constant water level
  • Low level alarm protects pumps and alerts operator to problems quickly
  • External sight glass with shutoff valves
  • Overflow and fill drain connections

Pump Reservoir System Options

  • Single or dual standby pumps; available with complete connecting trim, including discharge manifold and isolation vavles
  • Full 3/4" outdoor duty insulation including the bottom of the reservoir
  • Automatic standby pump switchover
  • VFDs for pumps and/or cooling tower fans
  • Tank cover
  • Electronic water make-up valve
  • Reservoir divider
  • Wave baffle reduces turbulence
  • Mounted and piped heat exchanger
  • Mounted and piped strainer or bag filter
  • Rotary non-fused disconnect
  • Programmable logic controller (PLC)
  • Second pump deck
  • Reservoir support legs
  • OSHA approved ladder, rail and toe board
PLC Control System
Resource Image Thermal Care has incorporated powerful Panasonic PLCs on its line of pump tanks that enable single point operation of chilling and tower systems. Learn More

Request a Quote

Submit a request for a FREE, no-obligation quote!

Ask A Question

Estimate Your Annual Energy Savings by Using a Thermal Care TC Series Central Chiller.
Save $10,000 - $30,000 Annually!
Calculate Savings