RQT Series Controllers
RQT & RMC Premium
Features
Premium PLC with touch screen HMI simultaneously displays up to two selection KPIs. Easy to use HMI screens provide a visual alert of a potential problem before a fault occurs. If the condition worsens, the alarm sounds and the unit stops to prevent equipment damage. Screens include:
- Heater malfunction
- Supply and return temperature
- Pump running hours
- Power brownout
- Control power on
- Autostart signal present
- Supply and temperature probe fault
- Pump on
- Pump overload
- Heat on
- Cooling On
- Low coolant inlet pressure
- High and low temperature limit warnings
- High and low temperature alarms
- Supply and return temperature probe faults
- Heater contactor life cycle counter
- Seal saver
- Pump running hours display
- Adjustable deviation alarm time delays
- Alarm horn and silence switch
- Electrical phase error
- Digital pressure
- Digital flow meter
- Password protection
- System statistics
- Trending data
- Modbus TCP/IP & OPC/UA communications
- Data logs and charting
- Recipes
- Out of specifcation alarms
Options
- Rotary non-fused disconnect
- Mold purge
- C-UL508A control panel
- Two-zone units
- Closed circuit brazed plate heat exchanger
- Solid state relay heater controls
- Remote temperature probe
- 300°F operating temperature
- Certified and calibrated RTD
- Process check valve
- Nonferrous corrosion resistant package
- Stacking rack
- Flow meter
- SPI communications
- Crash cool valve
- Remote display panel
Premium PLC Controller with Touchscreen
Trends
Alarm History
RQT Advanced
Features
PLC control and easy to use LCD screen with adjustable parameters offer precise temperature control. Data includes:
- Set point and actual temperature
- Pump running hours display
- Estimated flow display
- Adjustable alarm delay
- Heater contactor life cycle counter
- Heater malfunction
- Supply and return temperature
- Pump running hours
- Control power on
- Remote Start
- Pump on
- Pump overload
- Heat on
- Cooling On
- Operation mode status
- Low coolant inlet pressure
- High and low temperature limit warnings and alarm
- Remote setpoint 0-10vDC or 4-20mA input
- 0-10vDC process temperature restransmit output
- Supply and return temperature probe faults
- Control power voltage reading
- Seal saver
- Pump running hours display
- Adjustable deviation alarm time delays
- Adaptive maximum setpoint
- Digital process pressure
- Adaptive pressure relief
- Digital flow meter
- System statistics
- Modbus RTU
Options
- Rotary non-fused disconnect switch
- Alarm strobe and relay contact
- Electrical phase error
- Mold purge
- C-UL508A
- Two-zone units
- Closed circuit brazed plate heat exchanger
- Solid state relay heater controls
- Remote temperature probe
- 300°F operating temperature
- Process supply check valve
- Certified and calibrated RTD
- Nonferrous corrosion resistance package
- Stacking rack
- Ethernet for Modbus TCP
Advanced PLC Controller
RQT & RMC Standard
Features
Easy to use large LCD screen with adjustable parameters offers exact temperature control. Data includes:
- Set point and actual temperature
- Pump running hours display
- Temperature deviation alarms and warnings
- Adjustable alarm delay time
- Heater contactor life cycle counter
- Machine health tracker
- Selectable Control Tuning Levels
- Pump running hours
- Temperature deviation warnings and alarms
- Adjustable deviation alarm time delays
- Supply and return temperature display
Options
- Mold purge
- Stacking rack
Standard PLC Controller