1 to 3 Ton Portable Chillers

Request a Quote

Accuchiller EQ Series Portable Industrial Chillers feature a compact footprint with an easily accessible interior and a microprocessor that provides precise temperature control and extensive diagnostics. Air-cooled, water-cooled and remote condenser models are packed with many standard innovative features that improve chiller performance and reliability.

Accuchiller EQ Series Features

  • Air-Cooled 1 to 3 tons
  • Water-Cooled 2 to 3 tons
  • Remote Condenser 3 tons
  • Microprocessor Controller provides diagnostics and precise temperature control
  • Nonferrous process fluid circuit
  • Generously sized air-cooled condensers for industrial environments with ambient temperatures up to 115°F
  • Internal insulated polyethylene reservoir with large capacity and a removable top
  • Condenser fan discharges air quietly through top of the chiller
  • Hot gas bypass provides accurate capacity control and extends compressor life
  • Process Y-strainer protects the evaporator from contaminants in the water
  • Stainless steel brazed plate evaporator with flow and temperature safeties to guard against freezing
  • Removable inlet air filter (air-cooled units only) is easily cleaned and protects condenser coils to assure maximum efficiency
  • Water regulating valve keeps refrigerant pressure constant (water-cooled units only)
  • Evaporator freeze-up protection reduces potential for evaporator damage
  • Easily removable side panel allows for easy access to interior components

Specification Tables

Air Cooled Portable & Remote Condenser ChillerLearn More

ModelCooling Tons¹Set Point Range (°F)Standard PumpUnit MCA
(amps)2
Ship Weight
(lbs)
L x W x H
(in)
HPGPMPSI
EQ3A01 1 20-65 ¼ 2 80 11 @ 230/1/60 255 28 x 19 x 33
EQ2A02 2 20-65 1 5 39 8 @ 460/3/60 420 40 x 24 x 42
EQ2A03 3 20-65 1 7 38 11 @ 460/3/60 430 40 x 24 x 42
EQR033 3 20-65 1 7 38 11 @ 460/3/60 430 40 x 24 x 37

1Cooling tons based on using R-407c refrigerant with 12,000 BTU/Hr/ton with 50°F leaving coolant and 95°F ambient air.
2MCA is Minimum Circuit Amps with standard condenser fan and pump under full load, used for minimum wire size requirement.
3The remote condenser is only available for use with 230/1/60 main power.

Air Cooled Condenser Used with EQ2R03 ChillerLearn More

ModelRefrigerantConnection Sizes
(inch)
Condenser FansUnit MCA @
230/1/601
Ship Weight
(lbs)
L x W x H
(in)
InletOutletQtyHP
LAVB11210 R407C 7/8 7/8 1 ½ 3 565 49 x 46 x 41
 
1MCA is Minimum Circuit Ampacity (for wire sizing). Model EQ3A01 is only available as a 230 volt, single phase, 60 Hertz unit. 
 

Water Cooled Portable ChillerLearn More

ModelCooling Tons¹Set Point Range (°F)Standard PumpUnit MCA
(amps)2
Ship Weight
(lbs)
L x W x H
(in)
HPGPMPSI
EQ2W02 2 20-65 1 5 39 8 @ 460/3/60 420 40 x 24 x 37
EQ2W03 3 20-65 1 8 38 11 @ 460/3/60 430 40 x 24 x 37

1Cooling tons based on using R-407c refrigerant with 12,000 BTU/Hr/ton with 50°F leaving coolant and 85°F condenser water.
2MCA is Minimum Circuit Amps with standard condenser fan and pump under full load, used for minimum wire size requirement.

EQ Series Warranty

  • 5 Year Parts Warranty on Microprocessor
  • 1 Year Parts and Labor Warranty
  • $175 Lifetime Controller Exchange Policy After Initial 5 Year No-Cost Warranty
Resource Center
Microprocessor
Resource Image

Accuchiller portable chillers come standard with a microprocessor based control system designed exclusively for Thermal Care .

Learn More

Request a Quote

Submit a request for a FREE, no-obligation quote!

Ask A Question

Part Information


Reason For Request:

New Equipment

Replacement Parts

Customer Warranty and Support

Customer Feedback